SLink_41016_L
SLink_41016_L
Product Features
SLink_41016_L support 4 QSFP28 ports for 1G/10G network interconnection, support 1-to-1 interconnection switching or 1-to-N data broadcast mode.
Supports 4 QSFP28 ports and is compatible with QSFP+ and QSFP. Each QSFP28 port is divided into 4 SFP28 ports connected to the user side. All ports are designed with no difference.
And the supported functions are as follows:
One-to-one model
One-to-one + Multiple channel duplicate mode
Multiple channel duplicate mode
The 16-channel input and output crossover schematic is shown below:
Slink_41016_L latencys per port are described in the following table:
|
Port |
Lane |
Latency (ps) |
|
QSFPA |
Lane A1 |
2445 |
|
Lane A2 |
2634 |
|
|
Lane A3 |
2394 |
|
|
Lane A4 |
2746 |
|
|
QSFPB |
Lane B1 |
2323 |
|
Lane B2 |
2146 |
|
|
Lane B3 |
2496 |
|
|
Lane B4 |
2538 |
|
|
QSFPC |
Lane C1 |
2434 |
|
Lane C2 |
2535 |
|
|
Lane C3 |
2589 |
|
|
Lane C4 |
2430 |
|
|
QSFPD |
Lane D1 |
2768 |
|
Lane D2 |
2535 |
|
|
Lane D3 |
2690 |
|
|
Lane D4 |
2889 |
Note: The Latency parameter in the table is the loop latency of the board card (the total latency added by the RX and TX latencys).
Product Specifications
Board Parameters
Multi-port: 4 QSFP28 ports
Multi-channel: 16 data channels
Access port: Type-C USB to serial port
Support rate: 1G/10G/25G/40G/100G
Transmission medium: optical cable (single mode/multi-mode), copper cable
Mechanical Parameters
Length: 151mm
Width: 110mm
Height: 24mm
Weight: 170g
Working Temperature: -20℃～ +45℃
Working humidity: 10%~80% (no condensation)
Highest Altitude: 3000m
Hardware interface
Interconnection ports: QSFP、QSFP+、QSFP28/ZQSFP
Configuration port: Type-c
Power supply and fixed: +12V, PCIE X8/X16 slots