SLink_31016_L
SLink_31016_L
Product Features
SLink_31016_L is a layer-1 switching device based on PCIE structure which developed by Shengli Technologies。
Support 4 QSFP+ ports for 1G/10G network interconnection, support 1-to-1 interconnection switching or 1-to-N data broadcast mode.
Supports 4 QSFP+ ports and is compatible with QSFP. Each QSFP+ port is divided into 4 SFP+ ports connected to the user side. All ports are designed with no difference.
And the supported functions are as follows:
One-to-one model
One-to-one + Multiple channel duplicate mode
Multiple channel duplicate mode
The 16-channel input and output crossover schematic is shown below:
Slink_31016_L latencys per port are described in the following table：
|
Port |
Lane |
Latency (ps) |
|
QSFPA |
Lane A1 |
2250 |
|
Lane A2 |
2271 |
|
|
Lane A3 |
2210 |
|
|
Lane A4 |
2241 |
|
|
QSFPB |
Lane B1 |
2144 |
|
Lane B2 |
2170 |
|
|
Lane B3 |
2122 |
|
|
Lane B4 |
2132 |
|
|
QSFPC |
Lane C1 |
2227 |
|
Lane C2 |
2213 |
|
|
Lane C3 |
2217 |
|
|
Lane C4 |
2217 |
|
|
QSFPD |
Lane D1 |
2420 |
|
Lane D2 |
2400 |
|
|
Lane D3 |
2399 |
|
|
Lane D4 |
2385 |
Note: The Latency parameter in the table is the loop latency of the board card (the total latency added by the RX and TX latencys).
Product Specifications
Board Parameters
Multi-port: 4 QSFP+ ports
Multi-channel: 16 data channels
Access port: Type-C USB to serial port
Support rate: 1G/10G/40G
Transmission medium: optical cable (single mode/multi-mode), copper cable
Mechanical Parameters
Length: 166mm
Width: 110mm
Height: 24mm
Weight: 180g
Working Temperature: -20℃～ +50℃，Storage Temperature: -40℃～ +85℃
Working humidity: 10%~80% (no condensation)
Highest Altitude: 3000m
Hardware interface
Interconnection ports: QSFP, QSFP+, (IPASS reserved)
Configuration port: Type-c
Power supply and fixed: PCIE X8/X16 slots